Two activities at 180 W average. One along the valley, at a steady pace; the other on rolling roads, climbs, freewheeled descents, a few sprints for the town signs. Same average, and yet the second one emptied you. Average power counts every watt the same; your body doesn’t. Equivalent power is the number that puts that right.
It is the first step in computing a power-based load, which Training load sets out. This article goes further: why it is computed the way it is, what variability says, and how to read an activity with it.
Why the average lies
Above an easy pace, every extra watt costs more than the one before. Hunter Allen and Andrew Coggan, who proposed equivalent power, start from this: the body’s responses to effort, such as blood lactate or the glycogen burned, grow far faster than power. Ten seconds at 500 W are not paid back by ten seconds of freewheeling: the sprint cost much more than the rest returned.
The average misses all of this. On a steady ride, it doesn’t matter much; on a stop-and-go one, it underestimates the effort, sometimes by a lot.
Equivalent power, in words
Equivalent power, known elsewhere as NP®, answers one question: what steady power would have cost your body as much as the effort you actually rode? It is computed in three steps:
- Smooth power over 30 seconds, because the body doesn’t respond to a single second: it takes about that long to react to a change in effort.
- Give each moment a weight that grows much faster than its power — the fourth power: double the watts weighs sixteen times as much. That is how hard moments come to count for what they cost.
- Average those weights and come back to watts.
For a steady ride, it sits right on the average. The more the effort surges, the further above it it climbs.
Variability: steady or surging
Equivalent power divided by average power gives the variability. At 1.00, the effort was perfectly steady. The higher it goes, the more the activity was made of surges: climbs, accelerations, intervals.
Allen and Coggan use it to read pacing. A well-paced time trial stays close to 1: the rider spends their watts evenly, where each one costs least. A criterium, with its relaunch out of every corner, climbs far higher. For the same average, the more steadily you ride, the less you pay: that is why pacing a long climb or a time trial evenly is worth so much.
Intensity: the effort against your threshold
Divided by your FTP, equivalent power gives the activity’s intensity, as a share of FTP — IF® elsewhere. It says how hard the activity was for you, whatever its length. Allen and Coggan give typical ranges:
| Intensity, as a share of FTP | Typical activity |
|---|---|
| Below 75% | Recovery |
| 75–85% | Endurance |
| 85–95% | Tempo, intervals counted with their recoveries, long road races |
| 95–105% | Threshold intervals, time trials, criteriums and road races |
| 105–115% | Short time trials, track points races |
| Above 115% | Prologues, track pursuit |
An hour all out sits close to 100% by definition: that is what FTP means (What FTP is, and how to test it). An endurance ride at 90% wasn’t one: it will cost more recovery than you planned.
What it doesn’t say
- Your FTP sets intensity. An FTP that is out of date shifts every intensity by as much, and every load further still.
- It doesn’t see fatigue building up. The same equivalent power costs more in the fourth hour than in the first. That is what cardiac drift shows, and equivalent power doesn’t.
- It estimates a cost, not a performance. Two activities with the same equivalent power are not the same session: one made of long steady blocks and one made of sprints train different things (Power and heart-rate zones).
In Komeak
Every activity with power gets its Power card, once your FTP is filled in: average, equivalent, share of FTP, maximum, variability and work, then torque and left / right balance when your power meter measures them. With your race weight filled in, average and equivalent power are also given in W/kg.
- The ? button explains equivalent power and variability: close to 1, the effort was steady; beyond 1.10, made of surges — accelerations, climbs, intervals. Coasting on descents raises it too.
- The Regularity line of the Komeak analysis reads the variability of the pedaled power, coasting set aside: “A steady effort from start to finish”, or “A choppy effort: accelerations and surges”. In endurance, it then advises an even pace; on a climb or a time trial, to start a little easier and smooth out the surges. On an interval session, choppy by design, it says nothing.
- Equivalent power is what gives the load, with your share of FTP: the activity’s page shows the FTP used for its calculation.
- Select a stretch on the activity’s charts — a climb, an interval — and Komeak gives its own maximum and weighted power.
- The preview after an upload already gives equivalent power and intensity as a share of FTP.
- The heart-rate card relates equivalent power to heart rate: your efficiency, the watts produced at each beat.
Sources
- Allen H., Coggan A., McGregor S., Training and Racing with a Power Meter, 3rd ed., VeloPress, 2019.